Turning Lathe Machine(C6246V)Gap Bed Lathe machine
Features:
Spindle speed variable changed, with High Low speed steps,with speed display
The guide way and all gears in the headstock are hardened and precision ground.
The spindle system is high rigidity and accuracy.
The machines have powerful headstock gear train, high rotating accuracy and smooth running with low noise.
An overload safety device is provided on the apron.
Pedal or electromagnetic braking device.
Tolerance test certificate, test flow chart included
Technical parameter:
Standard accessories:
Optional accessories:
Spindle speed variable changed, with High Low speed steps,with speed display
The guide way and all gears in the headstock are hardened and precision ground.
The spindle system is high rigidity and accuracy.
The machines have powerful headstock gear train, high rotating accuracy and smooth running with low noise.
An overload safety device is provided on the apron.
Pedal or electromagnetic braking device.
Tolerance test certificate, test flow chart included
Technical parameter:
| Specification | C6246V |
| Swing over bed | 460mm |
| Swing over cross slide | 270mm |
| Swing in gap | 690mm |
| Distance between centers | 1000/1500/2000 mm |
| Valid length of gap | 165mm |
| Width of bed | 300mm |
| Spindle nose | D1-6 |
| Spindle bore | 58mm |
| Taper of spindle bore | No.6 Morse |
| Range of spindle speed | Variable, 30-2000rpm |
| Max.travel of top slide | 128mm |
| Max.travel of cross slide | 285mm |
| Max.section of tool | 25x25mm |
| Pitch thread of leadscrew | 6mm or 4T.P.I. |
| Longitudinal feeds range | 42 kinds, 0.031-1.7mm/rev |
| Cross feeds range | 42 kinds, 0.014-0.784mm/rev |
| Metric threads range | 41 kinds, 0.1-14mm |
| Inch threads range | 60 kinds, 2-112T.P.I. |
| Diametrical pitches range | 50 kinds, 4-112DP |
| Module pitches range | 34 kinds, 0.1-7MP |
| Dia. of tailstock sleeve | 60mm |
| Travel of tailstock sleeve | 128mm |
| Taper of tailstock sleeve | No.4 Morse |
| Power of main motor | 5.5kW(7.5HP) 3PH |
| Power of coolant pump | 0.1kW(1/8HP) 3PH |
| 3 Jaw chuck | Change gears |
| 4 Jaw chuck | Work lamp |
| Steady rest | Coolant system |
| Follow rest | Full splash guard |
| Face plate | Oil tray |
| Drive plate | Foot brake |
| Dead centers | Oil gun |
| Reduction sleeve | Some tools |
| Quick change tool post | Tool post protection |
| Digital readout | Live center |
| Chuck protection |
